[cisco-voip] vmware specs for CUCM

[Tanner Ezell]

You'll need at least 1GB (ram) and 72GB (disk) to install UCM (and most
other cisco products..)
ESXi runs with less overhead than workstation (no host overhead).

Make sure to select Red Hat Enterprise Linux 3 for the VM type when
installing a Linux based appliance.

On Sat, Aug 1, 2009 at 5:54 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> i'm looking at building or cannibalizing a couple of servers to run VMWare
> ESX or workstation so I can get my three CUCM nodes up and running.
>
> What are people using as their VMWare configs? disk/memory etc.
>
> Are there any advantages to going with ESXi vs workstation?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090801/71fe6af7/attachment.html>