[cisco-voip] vmware specs for CUCM

Justin Steinberg jsteinberg at gmail.com
Sun Aug 2 10:26:48 EDT 2009


I setup a few CUCM7s in workstation and configured them to dynamically
allocate the disk space.   After the initial install I recall the VM took up
around 15-20 GB of diskspace on the host machine.  After leaving the CM7 VMs
running 24/7 for a month or so, the size of the VMs grew to somewhere around
40-50 GB due to log files, etc.   This was in a small lab environment with
very little active call processing.

At least these are the numbers I recall, I no longer have the VMs to verify
the size.  Keep that in mind when you're planning out how many VMs you can
fit on your host machine.

Justin

On Sat, Aug 1, 2009 at 10:29 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Thanks Tanner. Looks like I'll need some large disks in order to run a few
> machines.
>
> Or do I have it wrong. Does VMware dynamically assign disk space? If I give
> a VM 72 gb, does that have to physically exist on the VMServer?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Tanner Ezell" <tanner.ezell at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> Sent: Saturday, August 1, 2009 9:16:59 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] vmware specs for CUCM
>
> You'll need at least 1GB (ram) and 72GB (disk) to install UCM (and most
> other cisco products..)
> ESXi runs with less overhead than workstation (no host overhead).
>
> Make sure to select Red Hat Enterprise Linux 3 for the VM type when
> installing a Linux based appliance.
>
> On Sat, Aug 1, 2009 at 5:54 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>> i'm looking at building or cannibalizing a couple of servers to run VMWare
>> ESX or workstation so I can get my three CUCM nodes up and running.
>>
>> What are people using as their VMWare configs? disk/memory etc.
>>
>> Are there any advantages to going with ESXi vs workstation?
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090802/7f179ee6/attachment.html>


More information about the cisco-voip mailing list