[cisco-voip] CUE in SRST

[Jonathan Charles]

I have that config, no MWI in SRST....



Jonathan

On Tue, Aug 4, 2009 at 9:01 AM, Lelio Fulgenzi<lelio at uoguelph.ca> wrote:
> Here's a snippit from the service engine startupconfig. I'm pretty sure this
> is what we had to do to get it working. The "mwi sip unsolicited" part for
> sure.
>
> ________________________________
> ccn subsystem sip
>  gateway address "<gateway to callmanager>"
>  mwi sip unsolicited
>  end subsystem
> ________________________________
> dial-peer to get things working in SRST:
>
> ________________________________
> dial-peer voice 37027 voip
>  description Cisco Unity Express VoiceMail Pilot
>  destination-pattern 37027
>  session protocol sipv2
>  session target ipv4:<servicemoduleIP>
>  dtmf-relay sip-notify
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 37028 voip
>  description Cisco Unity Express AutoAttendant (Business)
>  destination-pattern 37028
>  session protocol sipv2
>  session target ipv4:<servicemoduleIP>
>  dtmf-relay sip-notify
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 37029 voip
>  description Cisco Unity Express Greetings Administrator
>  destination-pattern 37029
>  session protocol sipv2
>  session target ipv4:<servicemoduleIP>
>  dtmf-relay sip-notify
>  codec g711ulaw
>  no vad
> !
> ________________________________
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Jonathan Charles" <jonvoip at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: cisco-voip at puck.nether.net
> Sent: Monday, August 3, 2009 6:41:45 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] CUE in SRST
>
> Well, the CUE in question has a CCM license and connects to CCM via JTAPI...
>
> Either way, I got it to work in the lab... except for MWI... how do
> you you make MWI work?
>
>
>
> Jonathan
>
> On Sat, Aug 1, 2009 at 11:12 PM, Lelio Fulgenzi<lelio at uoguelph.ca> wrote:
>> Not sure what you mean by CCM licenses and connecting via dial-peers.
>>
>> When we ordered CUE, we ordered the wrong licenses, so we just downloaded
>> the CCM files, wrote over the CCME files and everything went fine after
>> that.
>>
>> I'm not sure if the SIP ports take up SRST licenses.
>>
>>
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>>
>> ----- Original Message -----
>> From: "Jonathan Charles" <jonvoip at gmail.com>
>> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
>> Cc: cisco-voip at puck.nether.net
>> Sent: Sunday, August 2, 2009 12:04:12 AM GMT -05:00 US/Canada Eastern
>> Subject: Re: [cisco-voip] CUE in SRST
>>
>> So, no issues with the CCM license and connecting via dial peers?
>>
>>
>> J
>>
>> On Sat, Aug 1, 2009 at 5:03 PM, Lelio Fulgenzi<lelio at uoguelph.ca> wrote:
>>> We have exactly that configuration at one of our remote sites. CUE
>>> connects
>>> to SRST via SIP if I'm not mistaken. Everything works well, MWI, VM, etc.
>>> There was one thing that didn't work, but it had more to do with FWD'ing
>>> etc. CUE only has one alternate extension (the international format
>>> field)
>>> which caused so we had to modify our deployment plan so that all the
>>> phones
>>> had a shared extension or something like that.
>>>
>>> Also, the AA alternate greeting is played in addition to regular
>>> greeting,
>>> not in place of.
>>>
>>> Of course, that's all with the CUE version of two years ago, I'm sure
>>> there
>>> have been some improvements.
>>>
>>> ---
>>> Lelio Fulgenzi, B.A.
>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> "Bad grammar makes me [sic]" - Tshirt
>>>
>>>
>>> ----- Original Message -----
>>> From: "Jonathan Charles" <jonvoip at gmail.com>
>>> To: cisco-voip at puck.nether.net
>>> Sent: Saturday, August 1, 2009 5:03:08 PM GMT -05:00 US/Canada Eastern
>>> Subject: [cisco-voip] CUE in SRST
>>>
>>> So, I have a customer who wants to put in a CUE at every remote site
>>> for VM, but use CUCM for call processing (so the CUE would work in
>>> SRST, but be connected to CUCM via JTAPI).
>>>
>>> First off, is this possible?
>>>
>>> Second, how? And what limitations am I likely to run into? (MWI, VM, AA,
>>> etc...)
>>>
>>> Thanks...
>>>
>>>
>>>
>>> Jonathan
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>