[cisco-voip] ISDN PRI

[Oddiraju, Kiran @ London SMC]

ISDN PRI 30

H323 / MGCP

2821 gateway

CUCM 7

 

Hi Guys,

 

I was wondering if there is a way to test ISDN channels one at a time.
For instance I want to test calls thru a particular channel, say channel
#9, how do I do that? Is there a way to put maintenance block on all the
channels and leave channel #10 open so it picks the incoming or outgoing
calls?

 

Many thanks,

 

Kiran

 

 

 

 

 

 

 

 

/

 

 

 


CB Richard Ellis Limited, Registered Office: St Martin's Court, 
10 Paternoster Row, London, EC4M 7HP, registered in England and Wales No. 3536032. 
Regulated by the RICS and an appointed representative of CB Richard Ellis 
Indirect Investment Services Limited which is authorised and regulated by the Financial Services Authority.

This communication is from CB Richard Ellis Limited or one of its 
associated/subsidiary companies. This communication contains information 
which is confidential and may be privileged. If you are not the intended recipient, 
please contact the sender immediately. Any use of its contents is strictly prohibited 
and you must not copy, send or disclose it, or rely on its contents in any way whatsoever. 
Reasonable care has been taken to ensure that this communication 
(and any attachments or hyperlinks contained within it) is free from computer viruses. 
No responsibility is accepted by CB Richard Ellis Limited or its associated/subsidiary 
companies and the recipient should carry out any appropriate virus checks.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090805/d5d9cf4e/attachment.html>