[cisco-voip] ISDN PRI

Chris Ward (chrward) chrward at cisco.com
Wed Aug 5 12:42:21 EDT 2009


On the serial interface that gets created you should be able busy out
certain channels. I can't remember the exact command but if you poke
around the "isdn" command, you should find it.

 

-Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Oddiraju, Kiran
@ London SMC
Sent: Wednesday, August 05, 2009 12:30 PM
To: cisco-voip
Subject: Re: [cisco-voip] ISDN PRI

 

I think I found a way to do it, define one channel at a time under
controller E1...

 

controller E1 0/0/0

 pri-group timeslots 1-30

 

controller E1 0/0/0

 pri-group timeslots 9

 

please correct me if I am wrong...

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Oddiraju, Kiran
@ London SMC
Sent: 05 August 2009 14:21
To: cisco-voip
Subject: [cisco-voip] ISDN PRI

 

ISDN PRI 30

H323 / MGCP

2821 gateway

CUCM 7

 

Hi Guys,

 

I was wondering if there is a way to test ISDN channels one at a time.
For instance I want to test calls thru a particular channel, say channel
#9, how do I do that? Is there a way to put maintenance block on all the
channels and leave channel #10 open so it picks the incoming or outgoing
calls?

 

Many thanks,

 

Kiran

 

 

 

 

 

 

 

 

/

 

 

 

CB Richard Ellis Limited, Registered Office: St Martin's Court, 
10 Paternoster Row, London, EC4M 7HP, registered in England and Wales
No. 3536032. 
Regulated by the RICS and an appointed representative of CB Richard
Ellis 
Indirect Investment Services Limited which is authorised and regulated
by the Financial Services Authority.
 
This communication is from CB Richard Ellis Limited or one of its 
associated/subsidiary companies. This communication contains information

which is confidential and may be privileged. If you are not the intended
recipient, 
please contact the sender immediately. Any use of its contents is
strictly prohibited 
and you must not copy, send or disclose it, or rely on its contents in
any way whatsoever. 
Reasonable care has been taken to ensure that this communication 
(and any attachments or hyperlinks contained within it) is free from
computer viruses. 
No responsibility is accepted by CB Richard Ellis Limited or its
associated/subsidiary 
companies and the recipient should carry out any appropriate virus
checks.
 
CB Richard Ellis Limited, Registered Office: St Martin's Court, 
10 Paternoster Row, London, EC4M 7HP, registered in England and Wales
No. 3536032. 
Regulated by the RICS and an appointed representative of CB Richard
Ellis 
Indirect Investment Services Limited which is authorised and regulated
by the Financial Services Authority.
 
This communication is from CB Richard Ellis Limited or one of its 
associated/subsidiary companies. This communication contains information

which is confidential and may be privileged. If you are not the intended
recipient, 
please contact the sender immediately. Any use of its contents is
strictly prohibited 
and you must not copy, send or disclose it, or rely on its contents in
any way whatsoever. 
Reasonable care has been taken to ensure that this communication 
(and any attachments or hyperlinks contained within it) is free from
computer viruses. 
No responsibility is accepted by CB Richard Ellis Limited or its
associated/subsidiary 
companies and the recipient should carry out any appropriate virus
checks.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090805/fc6b2668/attachment.html>


More information about the cisco-voip mailing list