[cisco-voip] BAT IP Phone Services

[Lelio Fulgenzi]

I think this is dependent on CCM/CUCM version, is it not? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Tanner Ezell" <tanner.ezell at gmail.com> 
To: "svr file" <svr.file at gmail.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Tuesday, August 11, 2009 7:35:54 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] BAT IP Phone Services 

Yes, you can use BAT for IP Phone services. Check the bat spreadsheet, on the left side, last item, says something like "number of ip phone services, number of parameters" 


"1;3" says, 1 ip phone service, 3 parameters 


On Tue, Aug 11, 2009 at 4:28 PM, svr.file at gmail.com < svr.file at gmail.com > wrote: 


Hi All, 

Just a quick question, is there a way to configure IP Phone Services using the BAT tool or is there another to configure IP Phone Services in bulk? 

Thanks. 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 



_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090811/acba11ff/attachment.html>