[cisco-voip] Cisco 5400 Outdialing problem.

[Joseph Mays]

Have you ever routed an incoming call to go back outbound? We're trying to 
set up a cisco 5400 with voice capability to take a call coming in, return a 
dial tone, and allow you to dial out on another line. We're doing it with 
both a 24 IMT telco circuit and with a PRI plugged into the box. In both 
cases, you can dial in, either from a land line or from voip phones we have 
set up through the 5400, you get a dial tone, you see the box accept the 
outdial number as it's punched in, but it never places an outgoing call. If 
you have q921 and q931 debugging turned on when you try it with the PRI you 
can see that no ISDN communication ever occurs, so apparently the box never 
tries to place the call at all. It accepts the number, it just doesn't then 
actually dial it on the outgoing line.

Just working with the PRI at first, I guess I'd like to see an example of 
what the most basic configuration for such a setup would be.