[cisco-voip] PRI failover

[Syed Khalid Ali]

Using H.323 gateway and CCM 4.2

I did configure a secondary dial-peer for larger preference with it is
not working.


On Sun, Aug 16, 2009 at 12:52 AM, Dennis Heim<Dennis.Heim at cdw.com> wrote:
> DO you have any details on your setup?
>
> MGCP/H.323... etc?
>
> Dennis Heim
> Network Voice Engineer
> CDW  Advanced Technology Services
> 11711 N. Meridian Street, Suite 225
> Carmel, IN  46032
>
> 317.569.4255 Office
> 317.569.4201 Fax
> 317.694.6070 Cell
> dennis.heim at cdw.com
> www.berbee.com
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali
> Sent: Saturday, August 15, 2009 9:58 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] PRI failover
>
> dear all,
>
> How to failover to secondary pri line.
> I tried the trunk group command but it is not supported on this setup.
>
> --
> Thanks,
> Syed Khalid Ali
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Thanks,
Syed Khalid Ali