[cisco-voip] Transferring a call from an FXS port.

[Ryan Ratliff]

Check out http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ 
ht1vg224.html.

-Ryan

On Aug 18, 2009, at 6:46 AM, Granger, Simon wrote:


Hi all

Just a simple question, We have a couple of FXS ports in our router  
with an analogue phone attached. Is there a way to transfer calls off  
the analogue device.

We are using Call Manager V6
Router is configured as a H323 Endpoint
FXS ports SCCP controlled.
FXS configured as UK setup

Is there some key sequence, or can we use the “Recall” Button on the  
phone.

Many thanks

Simon

Registered No. 755780 England
Registered Office: FM Insurance Company Limited
1 Windsor Dials, Windsor,
Berkshire, UK, SL4 1RS
Regulated by the Financial Services Authority.
VAT No. G.B.: 792 4276 02
<ATT00001.txt>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip