[cisco-voip] Unity Connection Partitions and SS

[Lewis, Chris]

Would you mind explaining how you did this please?

Thanks

Chris

-----Original Message-----
From: Michael Back [mailto:Michael.Back at nisd.net] 
Sent: 19 August 2009 14:53
To: Lewis, Chris; Pat Hayes
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Connection Partitions and SS

If you are trying to set up a true multi-tenant system then partitions
and ss will probably be necessary.  If you are just trying to work out a
solution for the overlapping DNs then you don't need to worry about the
partitions and ss.  We have more than 100 sites with overlapping DNs and
do not use partitions or ss.  I considered it when we started
implementing Connection 7, but it seemed more trouble than it was
worth.

MB

>>> "Lewis, Chris" <Chris.Lewis at magnetar.com> 8/19/2009 4:37 AM >>>
Hi Pat,

Sorry for the delay,  I have been away.

I agree with what you are saying and this does work for different Phone
Systems.  The issue with when using the Voice Ports.  I have set up
forwarding rules on for the voice ports but when you set it up with more
that one Port for the Routing Rule the call does not get forwarded to
the Specific Mailbox.

Chris

-----Original Message-----
From: pat at wcyv.com [mailto:pat at wcyv.com] On Behalf Of Pat Hayes
Sent: 07 August 2009 16:29
To: Lewis, Chris
Cc: lelio at uoguelph.ca; cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] Unity Connection Partitions and SS

For a true multi-tenant install like this, you need to route by port
or phonesystem. For example, create a separate phone system (and
associated ports) for each site, point your pilots to line groups
containing just those ports, and setup forwarding routing rules with
the appropriate SS for each site.

On Fri, Aug 7, 2009 at 10:12 AM, Lewis, Chris<Chris.Lewis at magnetar.com>
wrote:
> It shows the dialled number rather than the pilot number.
>
> Tac are stumped btw. :-)
>
> ________________________________
> From: Lelio Fulgenzi
> To: Lewis, Chris
> Cc: cisco-voip at puck.nether.net 
> Sent: Fri Aug 07 09:02:03 2009
> Subject: Re: [cisco-voip] Unity Connection Partitions and SS
> What does the remote port status monitor say? It should tell you the
dialed
> pilot number. I haven't tried it my self (the forwarding rule config)
but it
> seems like that would be the way.
>
> It might be TAC time.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G
2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Chris Lewis" <Chris.Lewis at magnetar.com>
> To: lelio at uoguelph.ca 
> Cc: cisco-voip at puck.nether.net 
> Sent: Friday, August 7, 2009 9:56:01 AM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] Unity Connection Partitions and SS
>
> Tried it.
>
> That works for direct routing - ie sign in - but for forward routing
it
> doesn't work.
>
> ________________________________
> From: Lelio Fulgenzi
> To: Lewis, Chris
> Cc: cisco-voip at puck.nether.net 
> Sent: Fri Aug 07 08:49:14 2009
> Subject: Re: [cisco-voip] Unity Connection Partitions and SS
>
> your forward routing rules allow you to set a calling search space
based on
> the pilot you have forwarded to. it's the dialed number. not the
best
> terminology, it should say "forwarded target" or something like
that.
>
> try that out if you haven't already, or let us know if you have.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G
2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Chris Lewis" <Chris.Lewis at magnetar.com>
> To: cisco-voip at puck.nether.net 
> Sent: Friday, August 7, 2009 3:11:53 AM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] Unity Connection Partitions and SS
>
> Has anyone set up UC utilising Partitions and SS?
>
>
>
> I am trying to do the following:
>
>
>
> 4 separate sites with overlapping DNs.
>
>
>
> I have setup UC with separate Partitions and SS.  Added DNs to their
> respective Partitions.  Set up Direct Routing Rules to allow the DN
to dial
> UC - I have separate Pilot Numbers as per Cisco docs.
>
>
>
> The issue is when you try to dial the DN and have it forwarded to
vmail.
> These use forward routing rules and due to the CallerID not being
recognised
> as Vmail ID (IE Pilot number) they fail.
>
>
>
> Has anyone successfully managed to get this sort of scenario
working?
>
>
>
> Thanks
>
>
>
> Chris
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
> _______________________________________________ cisco-voip mailing
list
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip 
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip 
>
>

The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.