[cisco-voip] help with translating route patterns in CCM to dial-peers in CME

[Monica Hardy]

Hello everyone I have to convert a very old CCM 3.3 to a CME version 7.

 

I have only done basic configurations with dial-peers and need a little
bit of help translating the route patterns on the CCM to the dial-peer
statements on the CME.

 

I have two ways to get to the PSTN in this location.  One on the PRI in
the CME and one on a VG200 with FXO ports so I have a lot of dial-peer
statements to build.

 

Can you please help with these examples?

------------------------------------------------------------------------
------------------------------------------------------------------------
-------------

On CCM 3.3 the route pattern is 0.[2-9]! (using PRI on CME)

 

would it be this on the CME:

 

dial-peer voice 500 pots                                     

  destination-pattern 0[2-9]T      --- does 0.[2-9]! in CCM translate to
this in CME?

  port 0/2/0:23

  prefix ????  can I prefix ranges??? 

 or should I use forward digits all??   I have no idea how many digits
will be sent.

 

------------------------------------------------------------------------
------------------------------------------------------------------------
------------------

On CCM 3.3 the route pattern is 0.0570! (using VG200 FXO)

 

would it be this on the CME:

 

 dial-peer voice 604 voip                                 

 destination-pattern 00570T

 session-target ipv4:10.X.X.X

 dtmf-relay h245-alphanumberic rtp-nte

 codec g711ulaw

 no vad

 

 

On CCM 3.3 the route pattern is 0.0041! #  BLOCK

 

would it be this on the CME:

 

Dial-peer voice 702 voip

destination-pattern 0.0041T             

session-target ipv4:1.2.3.4     -----send to non-existent target

dtmf-relay h245-alphanumeric rtp-nte

codec g711 ulaw

no vad   

 

 

Thank you

 

Monica

--------------------------------------------

 

 

 

Monica P. Hardy

Openwave

Sr. Network Engineer

Phone: 650-480-5597

email:  monica.hardy at openwave.com <mailto:monica.hardy at openwave.com> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090819/dae29863/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2361 bytes
Desc: image001.gif
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090819/dae29863/attachment.gif>