[cisco-voip] peer firmware sharing via AXL

[Mordechai]

But in which table? I searched through the data dictionary for a couple of
hours and couldn't figure this out. Appreciate your help.

 

From: Dennis Heim [mailto:Dennis.Heim at cdw.com] 
Sent: August-20-09 4:30 AM
To: Mordechai; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] peer firmware sharing via AXL

 

There is a field in the database that contains the product specific
information in xml format if memory serves correct.

 

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell

dennis.heim at cdw.com
www.berbee.com <http://www.berbee.com/> 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mordechai
Sent: Thursday, August 20, 2009 12:09 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] peer firmware sharing via AXL

 

Hello,

 

Anybody knows the table that holds Product Specific Configuration Layout
features for a phone in 5.1 database? Specifically, I need to set PFS on a
bunch of phones. BAT will not do this properly. There is an exe script from
Cisco but there is a lot of confusion if it will work with 5.1 

 

In any case knowing where it is in the DB can be very handy (there are other
features that might be useful to control e.g. PC port etc).

 

Thanks,

 

Mordechai

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090820/e87d4be1/attachment.html>