[cisco-voip] Call Manager v7 Controlling Admin Access to Phones by Location

[Lelio Fulgenzi]

cool. good to hear there are options. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Sean Walberg" <swalberg at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "steve siltman" <steve.siltman at assurant.com>, cisco-voip at puck.nether.net 
Sent: Thursday, August 27, 2009 11:30:01 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Call Manager v7 Controlling Admin Access to Phones by Location 

In CUPM you can map the groups various ways. Device pools is one. We do it by the AD department field and get the sites to make sure the field starts with their site name. 


Sean 


On Thu, Aug 27, 2009 at 8:31 AM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 




There are quite a few 3rd party solutions out there that do this. They're not cheap though. A 10,000 phone installation could cost you upwards of 100K to deploy. There's Cisco provisioning management tool if you're looking at a Cisco solution. It's an entire deployment process, so users can log in, and request changes, then people have to approve it, make the changes, etc. I can't remember how the groups are managed though, it might be device pools, it might not be. Others I'm currently looking at are from Arcana Networks and 2nd Nature/Unimax. 

I think just by asking, you'll probably get a couple of cold calls.. ;) 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "steve siltman" < steve.siltman at assurant.com > 
To: cisco-voip at puck.nether.net 
Sent: Thursday, August 27, 2009 12:24:07 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Call Manager v7 Controlling Admin Access to Phones by Location 


I've had a few requests asking for users at certain sites be given access to change Phone settings for their site. Is it possible to limit an end user access to phones by location? It appears that I can give them this access but they can modify any phone on the cluster. 

If not, is there a 3rd party app thats available? 

Thanks, 
Steve 


This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof. 



Thank you. 




_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 




-- 
Sean Walberg < sean at ertw.com > http://ertw.com/ 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090827/26699bb1/attachment.html>