[cisco-voip] CCM 4.1.3 and CUCM 7.1.2 on same Unity 4.0(5) server?

[Lelio Fulgenzi]

Yes. You would just add another Integration and assign ports to that new cluster. 

Alternatively, create an ICL between the clusters and access VM that way. 

I can not recall if MWI through ICL is supported or not. If not, you need at least one port for MWI on the other cluster. 

However, with Unity 4.0(x), MWI refresh is sent across all phone systems (or integrations). You might get your self with a lot of failures. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "c3voip" <c3voip at nc.rr.com> 
To: cisco-voip at puck.nether.net 
Sent: Thursday, August 27, 2009 10:34:52 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] CCM 4.1.3 and CUCM 7.1.2 on same Unity 4.0(5) server? 




Would it be possible to add a CUCM 7.1.2 cluster to a Unity 4.0(5) server that already has a CCM 4.1.3 cluster on it? 



Thanks, 

-C 




_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090827/2c91c9dc/attachment.html>