[cisco-voip] FXO interface on VWIC2-2FXO why can't Attendant DN beHunt Pilot number?

[Norton, Mike]

I put hunt pilots as the Attendant DN all the time, and have never had
an issue. That's on 4.1 and 6.1. Don't forget that the hunt pilot has to
be in a partition that is reachable from the FXO port's CSS.

 

-- 

Mike Norton

I.T. Support

Peace Wapiti School Division No. 76

Helpdesk: 780-831-3080

Direct: 780-831-3076

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: August-28-09 12:08 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO interface on VWIC2-2FXO why can't Attendant DN
beHunt Pilot number?

 

I recall from CallManager 4.1(3) thru 7.1(2a) you can't put a Hunt Pilot
number as the Attendant DN number under Device > Gateway > FXO >
Attendant DN? It just won't work.  Now if I put a fake number, then a
translation pattern to the Hunt Pilot it works!  Is this a bug?

 

 

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090828/c52b323d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 47420 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090828/c52b323d/attachment.png>