[cisco-voip] FXO interface on VWIC2-2FXO why can't Attendant DN beHunt Pilot number?

Norton, Mike mikenorton at pwsd76.ab.ca
Fri Aug 28 18:21:15 EDT 2009


Hmm... well, I do have the CSCsb42763 workaround in place to take care
of other hunt pilot limitations. Maybe that fixes the Attendant DN issue
as well so I just never noticed it???

 

-- 

Mike Norton

I.T. Support

Peace Wapiti School Division No. 76

Helpdesk: 780-831-3080

Direct: 780-831-3076

 

 

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: August-28-09 2:21 PM
To: Norton, Mike; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO interface on VWIC2-2FXO why can't
Attendant DN beHunt Pilot number?

 

The CSS is correct on FXO, if I change it to a phone's extension it
works fine, or do the translation workaround.  I'm able to easily
duplicate in 7.1.2a.  We have about 600 sites being installed for
customer, installing 13 a night and every time we make the Attendant DN
point to Hunt Pilot it never rings on Hunt Pilot...

 

From: Norton, Mike [mailto:mikenorton at pwsd76.ab.ca] 
Sent: Friday, August 28, 2009 4:05 PM
To: Jason Aarons (US); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO interface on VWIC2-2FXO why can't
Attendant DN beHunt Pilot number?

 

I put hunt pilots as the Attendant DN all the time, and have never had
an issue. That's on 4.1 and 6.1. Don't forget that the hunt pilot has to
be in a partition that is reachable from the FXO port's CSS.

 

-- 

Mike Norton

I.T. Support

Peace Wapiti School Division No. 76

Helpdesk: 780-831-3080

Direct: 780-831-3076

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: August-28-09 12:08 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO interface on VWIC2-2FXO why can't Attendant DN
beHunt Pilot number?

 

I recall from CallManager 4.1(3) thru 7.1(2a) you can't put a Hunt Pilot
number as the Attendant DN number under Device > Gateway > FXO >
Attendant DN? It just won't work.  Now if I put a fake number, then a
translation pattern to the Hunt Pilot it works!  Is this a bug?

 

 

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090828/a801a633/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 47420 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090828/a801a633/attachment.png>


More information about the cisco-voip mailing list