[cisco-voip] FXO port showing line reversal

[Jason Aarons (US)]

I think this is because PSTN 1FB (POTS) line has tip/ring mixed?

 

2/0/8 is a FXO interface going to Bell..

 

Debug vpm signal

Aug 29 15:58:45.387: htsp_process_event: [2/0/8, FXOLS_ONHOOK,
E_DSP_SIG_0110]   

Aug 29 15:58:45.387: fxols_line_reversal_clid_wait. On_hook line
reversal detected possibily due to crossed cable

 

http://markmail.org/message/pvon6jijhjcexiwr#query:FXO%20port%20showing%
20line%20reversal+page:1+mid:fk2n37l26pkdzcgw+state:results




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090829/71b2eb8a/attachment.html>