[cisco-voip] Load Authentication Failed

[O'Brien, Neil]

Hey Guys,

 

I'm building a call manager 7.1 cluster and have been going along
relatively smoothly until I plugged in a phone!!

 

I've been testing with some 7945's that I had spare and they are working
fine.  They upgraded their firmware when they registered and all was
good.

 

The customer has actually bought 7942/7962's.  I plugged in a couple to
test and when they begin to do the firmware upgrade I get "Auth Fail" in
the upgrade window.  They then reset and boot into normal mode.  When I
check the device log, I see "Load Authentication Failed".

 

I'm using the PUB as the primary TFTP server, I'm going to try using the
SUB now.

 

I've searched around and can't seem to find anything related to this
issue.

 

Thanks in advance,


Neil

 

Regards,

 

Neil O'Brien

Network Engineer

 

Datapac Ltd

Phone: +353 1 426 3500

Fax:    +353 1 426 3501

Email:  nobrien at datapac.com

Web:   www.datapac.com

 

 

 

Datapac is the leading Irish business technologies provider

IT Maintenance & Managed Services | Virtualisation & Storage Solutions |
Microsoft Infrastructure Solutions 

Voice & Data Networks | Unified Communications | Microsoft Dynamics Nav
ERP | EPOS Retail Solutions | IT Consumables

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091201/b779690f/attachment.html>