[cisco-voip] Translation Pattern Alternate Routing

[STEVEN CASPER]

 I have several large locations where I want to route calls between sites transparently when dialing 9 plus the IP phone number. I know I can use translation patterns to accomplish this but how can I make sure calls would continue to complete if the wan is down to a site and the translation pattern can not reach the phone. Is this where a Gatekeeper would come into play?
 
Thanks
Steve
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091202/9cfa5e9f/attachment.html>