[cisco-voip] Cisco VG224 strange behavior

[kuanming Li]

TAC said that 12.4(24)T2 has some more fixes. I have a issue for a port keep
in off-hook after first dial-in, the reloading of the VG224 is the way to
make it on-hook.


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Matthews
Sent: Wednesday, December 02, 2009 10:15 AM
To: Aleksandar
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco VG224 strange behavior

This feature isn't supported in that code. 12.4(25a) is a mainline
release.  This wasn't supported until 12.4(4)T.  Download something
like 12.4(20)T4 or 12.4(22)T2 and it should work better.

-nick

On Wed, Dec 2, 2009 at 9:54 AM, Aleksandar
<aleksandar.topuzovic at gmail.com> wrote:
> Hi,
>
> I have a VG224 that works fine for some time (around 1-2 weeks) but then
> after some time some of the voice ports behave strange.
> PORT           CODEC    VAD VTSP STATE            VPM STATE
> ============== ======== === ==================== ======================
> 2/2           -         -  -                     FXSLS_PARK
> 2/15          g711ulaw  n  S_SETUP_REQ_PROC      FXSLS_ONHOOK
>
> and
>
> Telephony call-legs: 2
> SIP call-legs: 0
> H323 call-legs: 0
> Call agent controlled call-legs: 0
> SCCP call-legs: 0
> Multicast call-legs: 0
> Total call-legs: 2
> 0    : 1752 1038924670ms.1 +-1 pid:0 Originate  connecting
>  dur 00:00:00 tx:0/0 rx:0/0
>  Tele 2/15 (1752) [2/15] tx:0/0/0ms None noise:0 acom:0  i/0:0/0 dBm
>
> 0    : 1756 1039060400ms.1 +-1 pid:0 Originate  connecting
>  dur 00:00:00 tx:0/0 rx:0/0
>  Tele 2/15 (1756) [2/15] tx:0/0/0ms None noise:0 acom:0  i/0:0/0 dBm
>
> Telephony call-legs: 2
> SIP call-legs: 0
> H323 call-legs: 0
> Call agent controlled call-legs: 0
> SCCP call-legs: 0
> Multicast call-legs: 0
> Total call-legs: 2
>
> even though no call is active or trying to connect.
> It's connected to CUCM 7.0(2) with SCCP, running IOS 12.4(25a) (did try
> actually a few of them but the problem persists). After a restart
everything
> works fine for, again a random period of days (1-2 week) and then fails
> again. VG224 replaced a few ATA186 which didn't experience any problems
> whatsoever. I have no ideas where to look next?
>
> I have another VG224 (running same IOS on the same CUCM, same
configuration)
> on another location which works fine for the last 6 moths.
>
> Best regards
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip