[cisco-voip] SSH to 79XX phones - UCM 6.1.4

[Fuermann, Jason]

To use ssh you have to set the parameters in CM under "Secure Shell Information" and then the phone would need the config. I'm assuming neither of those are done, so my best suggestion is to just cycle power on the switch port.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Lydick
Sent: Wednesday, December 02, 2009 1:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] SSH to 79XX phones - UCM 6.1.4

What is the default login and password for the SSH session on 7975 phones. Is there white paper for this that details the login and commands available. I have some phones that have IP's that will not register (on nortel switch) we need to hardcycle or dhcp release and shut/no shut the port. The nortel engineer forgot to tag the port...

Is this possible from CLI on the phone?


Best Regards,

Mike Lydick

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091202/30012ee6/attachment.html>