[cisco-voip] CUMA setup wizard unable to get past relaying info

Dale Shaw dale.shaw+cisco-voip at gmail.com
Wed Dec 2 17:53:27 EST 2009


Hi Dane,

On Thu, Dec 3, 2009 at 9:49 AM, Dane Newman <dane.newman at gmail.com> wrote:
>
> I am in the process of setting up cisco unified mobility advantange.  I am
> going through the wizard and I came to the part where we put in our exchange
> server for relaying.  I put in the info shown below but it won't take it.  I
> have setup the exchange with a receve connector to do the relaying with the
> proper settings.  I even telneted on port 25 and relayed a message using the
> process from the link.  This really puzzles me anyone have any ideas?

It's really just a guess, but it seems to want a hostname -- try
putting the IP address in square brackets, i.e. [10.1.80.34], or use a
local hosts file entry or DNS to allow the entry and resolution of a
hostname.

cheers,
Dale


More information about the cisco-voip mailing list