[cisco-voip] Dual company on a single CME

[Hussam Ahmad]

You can control it via dial plan for example 
First company can use 9 as an access code (i.e. 9XXXXXXXXXX)
Second company can use 8 as an access code (i.e. 8XXXXXXXXXX)

Thanks and best regards,

HUSSAM AHMAD
------------------------------------------------------------------------------------------------------
This e-mail communication and any attachments thereto contain information which is confidential and are intended only for the use of the individuals or entities named above. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking any action in reliance on the contents of these documents is strictly prohibited and may be illegal. Please notify us of your receipt of this e-mail in error and delete the e-mail and any copies of it


-----Original Message-----
From: Mirko Maffioli [mailto:mirkomaffioli at emisfera.it] 
Sent: Saturday, November 28, 2009 11:33 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dual company on a single CME

Hi,

On a single CME with 2 BRI line is it possible to have two different
companies and to separate the outgoing traffic (one company for each
bri)? 

Thank you
Mirko

-- 
Cordiali saluti
Mirko Maffioli

Emisfera Società cooperativa
CO-VER R&K
Via Quarantadue Martiri, 165
28924 Verbania - Italia
Iscr. Albo Coop. A113148 - Sez. cooperative a mutualità  prevalente
tel + 39.0323.586730 - 0323.586216
fax + 39.0323.586937 
mob + 39.3483399583
 
mail: mirkomaffioli at emisfera.it
web:  www.emisfera.it



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip