[cisco-voip] SRST + Localisation

[Hussam Ahmad]

If you have the correct localization the softekeys should be changed to the
correct localization, so if you have French they will be French.

Thanks and best regards,

HUSSAM AHMAD
Cisco Instructor | Sigma IT - Saudi Arabia

Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA
Tel: +966-1-2150100
Fax: +966-1-2151090
Mobile: +966-55-3266244
Email: hahmad at sigma-it.net
Website: www.sigma-it.net
----------------------------------------------------------------------------
--------------------------
This e-mail communication and any attachments thereto contain information
which is confidential and are intended only for the use of the individuals
or entities named above. If you are not the intended recipient, you are
hereby notified that any disclosure, copying, distribution or the taking any
action in reliance on the contents of these documents is strictly prohibited
and may be illegal. Please notify us of your receipt of this e-mail in error
and delete the e-mail and any copies of it



-----Original Message-----
From: Glen Cobby [mailto:glen at positivenetworks.co.uk] 
Sent: Monday, December 07, 2009 5:47 PM
To: PUCK
Subject: [cisco-voip] SRST + Localisation

Hi All,

I have a site that I am writing the design for at the moment, they wish to
localise the phones and use the French locale. They also will be using SRST,
I just set this up in my lab and in SRST I am using user-locale FR. The
standard system message shows in French, however the softkeys are in
English, can these softkeys have their names changed? I am running SRST
version 7.1.

Thanks

Glen 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip