[cisco-voip] SIP trunk dropping calls

Jason Aarons (US) jason.aarons at us.didata.com
Tue Dec 8 00:28:18 EST 2009


To clarify if VZB's SIP Trunk doesn't show a calling party number (or external mask) that matches a billing telephone number (BTN), the packets are just discarded...which can make troubleshooting and sending the call to next device in Route Group difficult..

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ccieid1ot
Sent: Monday, December 07, 2009 5:06 PM
To: Mark Holloway
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SIP trunk dropping calls

I work for VZB that supports customers with IP Trunking.  We have
customers that gets their calls dropped without the correct ANI.

On Mon, Dec 7, 2009 at 3:51 PM, Mark Holloway <mh at markholloway.com> wrote:
> They use Broadworks too.
>
> On Dec 7, 2009, at 2:25 PM, ccieid1ot wrote:
>
>> I'm speaking on Verizon's IP trunk.
>>
>> On Mon, Dec 7, 2009 at 3:22 PM, Mark Holloway <mh at markholloway.com> wrote:
>>> Not all providers reject calls with no From number on the SIP trunk.  We use Broadworks and for customers who want to send anything other than one of their DID's we enable Unscreened Calling.  It requires a Trunk Group Identifier to be set in Broadworks and CUBE must be used to inject the TGI into the registration and invite messages.
>>>
>>>
>>> On Dec 7, 2009, at 12:24 PM, ccieid1ot wrote:
>>>
>>>> I do know that the SIP provider will drop the call if there's no ANI.
>>>>
>>>> On Fri, Dec 4, 2009 at 6:22 PM, Nick Matthews <matthnick at gmail.com> wrote:
>>>>> As well - csim is not a great testing tool for VOIP protocols.  I
>>>>> would not depend on it.
>>>>>
>>>>> -nick
>>>>>
>>>>> On Fri, Dec 4, 2009 at 7:21 PM, Nick Matthews <matthnick at gmail.com> wrote:
>>>>>> You need to explain the call flow more.  All I see here is that you
>>>>>> have two cisco gateways, one makes a call, gets ringback, does media
>>>>>> negotiation, and then hangs up 20 seconds after the ringback comes in.
>>>>>>  Why does the user not answer within 20 seconds?  What's on the other
>>>>>> sides of both of these sip connections?
>>>>>>
>>>>>>
>>>>>> -nick
>>>>>>
>>>>>> On Fri, Dec 4, 2009 at 5:45 PM, Ali El Moussaoui <mousawi.ali at gmail.com> wrote:
>>>>>>> Hello,
>>>>>>>
>>>>>>> We installed an IPIP gateway and am trying one of the SIP legs using CSIM
>>>>>>> but i am not able to figure out why calls are failing although all sip
>>>>>>> messages seems correct.
>>>>>>>
>>>>>>> The full trace is attacehd i appreciate any help.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Ali
>>>>>>> _______________________________________________
>>>>>>> cisco-voip mailing list
>>>>>>> cisco-voip at puck.nether.net
>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>>
>>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> cisco-voip at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.


More information about the cisco-voip mailing list