[cisco-voip] CUCM 7.1 & IP Phones 6941 DHCP issue

Scott Voll svoll.voip at gmail.com
Tue Dec 8 14:43:40 EST 2009


put the switch voice Vlan on access Vlan. Try and upgrade the firmware then
change it back and see if it works.

wouldn't be the first time for a phone to do this.

Scott

On Mon, Dec 7, 2009 at 9:11 AM, Andre <abrenes at spcinternacional.com> wrote:

> Hi experts,
>
> I install a CUCM 7.1.3 and 58 6941 phones. The DHCP is running in a SW
> accessible by the phones.
>
> For some reason the 6941 phone type only take IP address of the
> DATA-VLAN instead of VOICE-VLAN configure in the switchport. If I
> connect an IP phone 7911 in the same port, this phone take the
> VOICE-VLAN IP address.
>
> Just in case, DHCP snooping can't be use.
>
> Can someone give me an advice?
>
> --
> André Brenes Vargas
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091208/9fb7f7ca/attachment.html>


More information about the cisco-voip mailing list