[cisco-voip] Load Balance between SIP dial-peers

[Hussam Ahmad]

You can but why do you need it, because how the first dial-peer will go
down.

 


Thanks and best regards,

 

HUSSAM AHMAD

Cisco Instructor | Sigma IT - Saudi Arabia


LOGO6.png


Olaya St., Akaria 3, Entrance 13, 5th Floor, Office 509 | Riyadh | KSA

Tel: +966-1-2150100

Fax: +966-1-2151090

Mobile: +966-55-3266244

Email:  <mailto:hahmad at sigma-it.net> hahmad at sigma-it.net

Website:  <http://www.sigma-it.net/> www.sigma-it.net

----------------------------------------------------------------------------
--------------------------

This e-mail communication and any attachments thereto contain information
which is confidential and are intended only for the use of the individuals
or entities named above. If you are not the intended recipient, you are
hereby notified that any disclosure, copying, distribution or the taking any
action in reliance on the contents of these documents is strictly prohibited
and may be illegal. Please notify us of your receipt of this e-mail in error
and delete the e-mail and any copies of it

 

 

From: Ali El Moussaoui [mailto:mousawi.ali at gmail.com] 
Sent: Wednesday, December 09, 2009 11:18 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Load Balance between SIP dial-peers

 

Hello Guys,

Is it possible to Load balance between 2 sip dial-peers ?

Ali

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091209/6d89020a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 11742 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091209/6d89020a/attachment.png>