[cisco-voip] QRT question..

[Wes Sisk]

If ATA are SCCP they should report StationConnectionStatisticsResponse 
at the end of every call which should go into cdr/car database.  This is 
not all of the information you get with QRT but it is usually enough to 
trend quality.

/Wes

On Wednesday, December 09, 2009 3:48:45 PM, Tim Reimers 
<treimers at ashevillenc.gov> wrote:
> Is it possible to set things up so that QRT data is collected on a 
> given DN at all times?
>  
> I have an ATA connected over a wireless link, with two modems on port1 
> and port2
> So there's no IP phone there for anyone to push QRT button.
>  
> But I need to collect info on the call quality, so that when they do 
> have trouble with those modems, I can verify whether it was a QOS 
> issue that actually occured or not.
>  
>  
>  
> Tim Reimers
> Systems Analyst II
> Information Technology Services
> City of Asheville
> 70 Court Plaza
> Asheville, NC 28801
> phone - 828-259-5512
> treimers at ashevillenc.gov <mailto:timreimers at ashevillenc.gov>
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091210/6a474540/attachment.html>