[cisco-voip] How to determine the DID range on an ISDN line

[Mark Holloway]

Nope. You need to contact the telco and ask what numbers are built in your trunk group. 

On Dec 10, 2009, at 1:40 PM, Countryman, Edward wrote:

> Typically you pay for each DID.  ATT charges us 10cents each per month.
>  
> You will like need to get this from your LEC or CLEC
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Aaron Riemer
> Sent: Thursday, December 10, 2009 12:24 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] How to determine the DID range on an ISDN line
>  
> Hi guys,
>  
> Is there an easy way to determine from a voice gateway what the DID number range is on a particular ISDN line E1 or can only the ISP give you this information?
>  
> Just want to know if it’s possible.
>  
> Thanks,
>  
> Aaron.
> 
> LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091210/598517a0/attachment.html>