[cisco-voip] BLF/Speed-Dial on 7914

[Nate Aliberto]

Bas,
 
Thanks for the confirmation.  You are indeed correct, after reviewing the Bill of Materials we're deploying 7916's against the 7965s not as I had earlier stated the 7914 product.  I'm performing the phase 1 install today so I'll have the opportunity to verify BLF with that configuration as well.
 
Thanks again for the timely response.
 
Nate

________________________________

From: Bas van der Veen [mailto:bas.vanderveen at gmail.com]
Sent: Thu 12/10/2009 10:05 AM
To: Nate Aliberto
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] BLF/Speed-Dial on 7914


Hello Nate,

I can confirm that BLF works on a 7960/7914 combo on CUCM 6.1.1.

The 7914 product documentation mentions Cisco Unified IP Phones 7960G (CP-7960G), 7961G (CP-7961G) , 7970G (CP-7970G) and 7971G-GE (CP-7971G-GE) as required phones.

IIRC the 7965 needs a 7915/16.

Regards

Bas


On Thu, Dec 10, 2009 at 2:13 PM, Nate Aliberto <nate at aliberto.net> wrote:


	All,
	 
	I've been trying to determine whether a 7914 Expansion module can be used to provide BLF/Speed-dial functionality.  I've seen various posts indicating that it will support either DN or Speed-Dial, but many reference CCM 5.X or previous releases.   I'm deploying as a sidecar to a 7965 and we're running CUCM 7.1(2).
	 
	Thanks,
	 
	
	Nate

	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091211/9d857d60/attachment.html>