[cisco-voip] Class based RTP Header Compression

[O'Brien, Neil]

Hi Craig,

 

See below.  I believe the WAN is MPLS but anything past our CE router is
ISP controlled.

 

 

class-map match-all CM-MATCH-SIG

 match ip dscp cs3 

class-map match-all CM-MATCH-RTP

 match protocol rtp

 

policy-map PM-QOS

 class CM-MATCH-RTP

  priority percent 50

   compress header ip rtp

 class CM-MATCH-SIG

  bandwidth percent 5

 class class-default

  fair-queue

 

interface Serial0/3/0

bandwidth 2000

 ip address *.*.*.* 

service-policy output PM-QOS

 

Thanks,


Neil

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091214/4a9f3b9e/attachment.html>