[cisco-voip] Sub: Regd configuration for E1 VWIC

[Dew Swen]

These docs could be handy:

http://www.cisco.com/en/US/docs/ios/12_1/termserv/configuration/guide/dcdchant.html
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800f9e3a.shtml
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a70fc.shtml

-
Dew Swen


On Wed, Dec 23, 2009 at 2:14 PM, sashank <sasanka.pathi at locuz.com> wrote:

>  Dear all,
>
> I am gonna install E1 vwic for a customer for PSTN calls. Does any one has
> a configuration example  or any configuration it will very help full for me.
> I searched in cisco website but couldnt get any information :-(
>
> Warm Regards,
>
> Venkata Sasanka.pathi(CELL NO: -91 950 265 2290)
> Consultant | unified communications
> Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)]
> (Office:914066115538)
> sasanka.pathi at locuz.com
> www.locuz.com
>
>
> Go ahead and print this out. It’s okay! The wood and paper industry plants
> 1.7 million new trees EVERY DAY
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091224/7b3b2dc8/attachment.html>