[cisco-voip] R: [english 100%] Re: CUCM 6.0.1 - After Migration from CCM 4.1 - IP voice Streaming Application don't work

[Alessandro Bertacco]

Hi Peter, thank you for your answer.

   The issue affect internal call, IP Phone to Ip Phones and also external
call made trough H.323 gateway, for call made from all site connected to the
cluster.

All 14 remote site are configured with SRST in H.323.

Regards
Alessandro

-----Messaggio originale-----
Da: Peter Slow [mailto:peter.slow at gmail.com] 
Inviato: sabato 26 dicembre 2009 19:47
A: Alessandro Bertacco
Cc: cisco-voip at puck.nether.net
Oggetto: [english 100%] Re: [cisco-voip] CUCM 6.0.1 - After Migration from
CCM 4.1 - IP voice Streaming Application don't work

Alessadro,
>I've uploaded new .wav file for the Music On Hold, and for Network on Hold,
but often, when a call is placed on hold, a BIP is plyed and no MOH
> music.

Often, or all of the time? Also, to confirm, you hear "beeps" (Tone on
Hold) in the non working scenario, as opposed to silence?

What types of devices are involved in the call (MGCP Gateway, IP
phone, cti port, h.323 trunk?) on either side?

-Peter


On Sat, Dec 26, 2009 at 9:48 AM, Alessandro Bertacco
<alessandro.bertacco at gmail.com> wrote:
>
>
> Hi all, and Merry Christmas to every one.
>
>
>
> I  wrote for a strange issue.
>
>
>
> CUCM 6.0.1 after migration, no MOH, ANN or CFG working anymore.
>
>
>
> I've uploaded new .wav file for the Music On Hold, and for Network on
Hold,
> but often, when a call is placed on hold, a BIP is plyed and no MOH music.
>
> Transcoding of the uploaded files work perfectly
>
>
>
> from RTMT i can see a lot of error regarding ANN, MOH, CFB and other IP
> voice Streaming App
>
>
>
> Like these:
>
>
>
> 12/18/2009 11:00:49.717 VoiceStrm|   [ANN][10.1.4.15]
> DeviceMgr::recvStationStopMediaTransmissionMsg *ERROR* Conference ID is
> invalid!,
>
passThruPartyID=33773331|<CLID::StandAloneCluster><NID::10.1.4.15><LVL::Erro
r><MASK::2000>
>
>
>
>
>
> 12/18/2009 11:08:53.480 VoiceStrm|
> [MOH][10.1.4.15]CTTCPSocket::DestroySocket *ERROR* Invalid socket,
>
m_Socket=-1|<CLID::StandAloneCluster><NID::10.1.4.15><LVL::Error><MASK::0080
>
>
>
>
> All service is Running and configured properly
>
>
>
>
>
> I've idea of upgrading the Cluster to the last version of the 6.x CUCM,
that
> is the 6.1.(4a)SU2.
>
>
>
> Do you think can resolve that issue?
>
>
>
> Thank you to all for replay and help
>
>
>
> Best Regards
>
>
>
> Alessandro Bertacco
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>