[cisco-voip] Calling Party Type

[Huffman, Tim]

Never mind.  I figured it out.  I had to set it manually on the Route Pattern as well as the Gateway config.

Thanks!

Tim Huffman

From: george.hendrix at l-3com.com [mailto:george.hendrix at l-3com.com]
Sent: Tuesday, December 29, 2009 2:04 PM
To: Huffman, Tim; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Calling Party Type

Tim,

  What type of trunk is this between CUCM and the Gateway and what is the circuit type, i.e. SIP trunk?

Bill Hendrix
L-3 Communications
george.hendrix at l-3com.com<mailto:george.hendrix at l-3com.com>
EITS Service Desk: 1-800-871-9983
Service Desk email: L-3IT.Help at l-3com.com<mailto:L-3IT.Help at l-3com.com/omailto:L-3IT.Help at l-3com.com>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Huffman, Tim
Sent: Tuesday, December 29, 2009 1:57 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Calling Party Type

All,

I'm having an issue with outbound calls.  I need to change the Calling Party Number, Type, and Plan to "Unknown."
[cid:image001.png at 01CA8892.38AB65C0]

Currently as you can see above it's giving me Plan: ISDN and Type: National.

I've manually tried to set these on the Gateway interface config in CUCM to "Unknown" with no avail.

Thanks,

Tim Huffman

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091229/0f8be288/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 2876 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091229/0f8be288/attachment.png>