[cisco-voip] CM 7.1 stalling on snmp?

[Wes Sisk]

concensus appears to be the first boot after upgrade should be slow. IBM 
is re-discovering hardware. Most report this taking upwards of 30 
minutes. Let it get all the way through.  Subsequent reboots should 
proceed without the delay.

survey says?

On Tuesday, December 29, 2009 4:49:02 PM, Wes Sisk <wsisk at cisco.com> wrote:
> other refererences to this say the server boots enough for ssh to 
> start so you can ssh in and progress things with
> "utils service start Cisco Service Manager"
>
> Can you try that while I dig through the hits?
>
> /wes
>
> On Tuesday, December 29, 2009 4:21:29 PM, Scott Voll 
> <svoll.voip at gmail.com> wrote:
>> has anyone ever ran into an issue with 7.13 where the start up after 
>> install stalls on "snmp-mon-0.0.0.19-17"
>>  
>> This is an IBM MCS 7825.
>>  
>> Any ideas?
>>  
>> Thanks
>>  
>> scott
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>   
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091229/fb712b7f/attachment.html>