[cisco-voip] international calling

[Erick Bergquist]

The numbering-type command on the dial-peer is for matching, so the
call won't hit that dial peer if the numbering type isn't
international already. So CUCM has to send the call to the gateway as
international, etc for it to match that peer.


On Wed, Dec 30, 2009 at 1:52 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> Telco only excepts international type and no 011.  thus the reason to remove
> the 011 and send the numbering type.
> other thoughts?
> Scott
>
> On Wed, Dec 30, 2009 at 11:50 AM, kuanming Li <kli at dal.ca> wrote:
>>
>> dial-peer voice 30 pots
>>
>>  numbering-type international
>>
>>  preference 1
>>
>>  destination-pattern 011T
>>
>>  port 0/0/0:23
>>
>> forward-digits all
>>
>> //or prefix 011
>>
>>
>>
>> ======the pots dial-p will remove the 011 when it leave the gateway, so
>> you need add the 011 back or forward all.
>>
>>
>>
>>
>>
>>
>>
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
>> Sent: Wednesday, December 30, 2009 12:54 PM
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] international calling
>>
>>
>>
>> on an H323 VGW I have a dail peer
>>
>>
>>
>> dial-peer voice 30 pots
>>
>>  numbering-type international
>>
>>  preference 1
>>
>>  destination-pattern 011T
>>
>>  port 0/0/0:23
>>
>>
>>
>> and it looks like I don't get a match on
>>
>>
>>
>> 0110289778399
>>
>>
>>
>> Why?
>>
>>
>>
>> It' should drop the 011 and change the calling number type to
>> international.  right?
>>
>>
>>
>> am I missing something?
>>
>>
>>
>> TIA
>>
>>
>>
>> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>