[cisco-voip] Setting Cluster to Mixed Mode

Bill Greenwood (US) bill.greenwood at us.didata.com
Tue Feb 10 09:30:27 EST 2009

I am trying to set the security mode to mixed mode on a 6.1 cluster.
The CTLclient is failing to find the security token.  The token is
installed in the USB port on the CallManager.  Should the token be
installed in the local (where the CTLclient is running) or on the
CallManager?  I remember that the token should be installed in the local
system, but I am doing this remote and the customer has the token in the
CallManager (which is at a unmanned facility).  Is there a way to get
the CTLclient to recognize the token in the CallManager or must it be







This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090210/dc2ed3f3/attachment.html>

More information about the cisco-voip mailing list