[cisco-voip] Switch replacement causes one-way audio?

[Scott Voll]

I would check to make sure it's not a routing issue.

Scott

On Wed, Feb 11, 2009 at 4:09 PM, Biffle, Gerrad <
Gerrad.Biffle at greensboro-nc.gov> wrote:

>  This past weekend our network team replaced some aging 4006s with 3750
> stacks.  Since then we've had users complaining that callers on the far
> end cannot hear them.  Our first thought was to hard code the switch-port
> to 100/full (we're using 7960Gs) – and that didn't seem to help.
>
> Does anyone have any ideas on what we could check before opening a TAC
> case tomorrow?
>
> Thanks.
>
>
>
>
> =======================================================
> Please note that email sent to and from this address is subject
> to the North Carolina Public Records Law and may be disclosed to
> third parties.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090212/fc326fcf/attachment.html>