[cisco-voip] Dial Peer Hunting

[Pete Fabian]

Does anybody know how to configure a cisco voice gateway to stop hunting through dialpeers based on specific messages.  IE I do not want the vg to hunt to other dial-peers when it receives a SIP 486 or SIP 600 message but I do want it to continue hunting when it receives a SIP 404 Not Found message

Thanks

Pete Fabian  Senior Voice Engineer, TELESPHERE
480.385.7059  (w) | 480.385.7079 (f) | pfabian at telesphere.com | www.telesphere.com<http://www.telesphere.com/>
9237 E. Via de Ventura | Suite 250 | Scottsdale, AZ 85258

[cid:image001.jpg at 01C98DBF.3C977A80]



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090213/f90d4e41/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1629 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090213/f90d4e41/attachment.jpg>