[cisco-voip] Hotline question

Terry Oakley Terry.Oakley at rdc.ab.ca
Sun Feb 15 21:26:06 EST 2009

Does anyone know how (CUCM 6.1) to setup a Hotline on an analog set connected via a VGC?   I saw the PLAR for the 7941/7961 sets but we have a set by our Shipping and Receiving department that is an old analog (no dial on it) that is used for after hours deliveries.    On our old Nortel system we could do it.   Just wondering if there is a way to do it on our Cisco system.

Thanks in advance


Terry Oakley
Telecommunication Coordinator,
Information Technology Services
100 College Blvd,  Red Deer, AB T4N 5H5
Red Deer College<http://www.rdc.ab.ca/>
Tel (403) 342-3521
Terry.Oakley at rdc.ab.ca<mailto:Terry.Oakley at rdc.ab.ca>
When you get here you understand

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090215/03b86e53/attachment.html>

More information about the cisco-voip mailing list