[cisco-voip] VG224 and Call boxes
JBF005 at shsu.edu
Tue Feb 17 09:39:02 EST 2009
Call boxes, essentially speakerphones that autodial a number when you push a button. Also, yes if we use a butt set or connect a regular phone to the line, it works fine.
From: Peter Slow [mailto:peter.slow at gmail.com]
Sent: Monday, February 16, 2009 11:44 PM
To: Fuermann, Jason
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VG224 and Call boxes
What are these "boxes?" If you replace them with a cheap analog
phone, can you reproduce the problem with that?
On Mon, Feb 16, 2009 at 3:44 PM, Fuermann, Jason <JBF005 at shsu.edu> wrote:
> We have a bunch of call boxes that have suddenly started to hang up when the call is answered at our PD. These had been previously working fine, and the vendor even says that the VG224 is compatible with them. The only change I know about that occurred was we rebooted all the nodes in our cluster and the vg224 gateways as well. The CDR's show a disconnect code of "unknown" so I'm thinking that maybe this is a supervisory disconnect from the gateway. Does anybody have any ideas on what may be going on?
> cisco-voip mailing list
> cisco-voip at puck.nether.net
More information about the cisco-voip