[cisco-voip] CME group phone broadcast

[Jack Martin]

Before this feature you could only set the pilot as a line appearance on many phones to get the same behavior, then CFNA to your final destination.

Jack Martin - CCVP, ASE
Network Engineer
Tushaus Computer Services
10400 Innovation Drive, Ste 100
Milwaukee, WI 53226
414.908.2222 Helpdesk
414.908.2267 Work
414.908.4467 Fax
414.477.6990 Cell

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Pender, James
Sent: Tuesday, February 17, 2009 6:18 AM
To: svr.file at gmail.com; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CME group phone broadcast

In newer versions of CME&IOS you can do what is called a blast group. I do not know off the top of my head what version this support was added, I think it was CME 4.3. There are some caveats though as far as SCCP and SIP go.

voice hunt-group 1 parallel
 list 201,202
 timeout 16
 pilot 505

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmecover.html#wp1145800

Thanks,
Jim Pender


________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of svr.file at gmail.com
Sent: Tuesday, February 17, 2009 3:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME group phone broadcast
Hi guys,

I have a question regarding configuring an inbound broadcast ring to all extensions.

At the moment I have a 'connection plar' pointing to an 'ephone-hunt 1 sequential' to hunt through the extensions but can't figure out how to broadcast (make the extensions ring) the inbound call as apposed to hunt?

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090217/4f0e41c3/attachment.html>