[cisco-voip] Billing server setup

[Ed Leatherman]

the CDR service parameters have to be set on each server, it isnt
clusterwide (unless it was changed in 7)

On Tue, Feb 17, 2009 at 5:23 PM, Michael Back <Michael.Back at nisd.net> wrote:

> I am trying to figure out how the CDR export for billing servers works
> on UCM7.  I have an FTP server setup to test this temporarily.  I have
> configured the billing application server parameters with the IP,
> username, password, and path.  Protocol is FTP for now.  Enterprise
> parameters for CDR is set to 1.  I made a few calls on the cluster, but
> no files are being exported to the ftp.  I tested ftp access using the
> same username and password, and everything works fine.  What am I doing
> wrong?  Thanks for your help.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Ed Leatherman
Assistant Director, Voice Services
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090217/f1a7d4c4/attachment.html>