[cisco-voip] Barge function key on CCM

[davidytk]

I can see the barge button during remote in use state. However when I press
the barge button (3001 call 2100(share line), then the other phone user
share line 2100), it show busy tone instead entering the conference. When I
press cbarge button, it is okay.

Is there any other step need to enable the barge button

-----Original Message-----
From: dschulz [mailto:dschulz at skyline-ats.com] 
Sent: Monday, February 23, 2009 3:03 AM
To: 'davidytk'; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Barge function key on CCM

You can do it either place.  However, the enterprise parameters allows you
to select the options for privacy clusterwide (on by default, which means
that the barge option is unavailable.....unless you program a privacy button
on the bargee and have them turn privacy off).  HTH.

Dave Schulz
dschulz at skyline-ats.com
-----Original Message-----
From: davidytk [mailto:davidytk at netvigator.com] 
Sent: Sunday, February 22, 2009 11:10 AM
To: dschulz at skyline-ats.com; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Barge function key on CCM

Hi

For the privacy parameter, is it enable on enterprise parameters or in phone
setting.

-----Original Message-----
From: dschulz at skyline-ats.com [mailto:dschulz at skyline-ats.com] 
Sent: Sunday, February 22, 2009 9:49 PM
To: davidytk; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Barge function key on CCM

The barge key is enable as long as you have the built-in bridge enabled and
privacy is disabled on the phone.  See the enterprise parameters.   Keep in
mind, that privacy is on by default.  So, on the bargee phone, configure a
privacy button on the template and turn off privacy.  HTH

-----Original Message-----
From: davidytk <davidytk at netvigator.com>
Sent: Sunday, February 22, 2009 12:43 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Barge function key on CCM

Hi All

 

I am now using CCM 4.1.2, I want to enable barge function key on CCM for IP
Phone. I have already enable the barge function on the service. However I
cannot find any barge key on the IP Phone in the phone softkey template.

 

How can I add the key on the phone?

 


[The entire original message is not included]