[cisco-voip] PC Port on Phone Fails During Large Data Transfer

[James Buchanan]

When you hardcoded to 100/Full, did you hardcode on the switch end and
inside the phone?

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of STEVEN CASPER
Sent: Tuesday, February 24, 2009 9:49 AM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] PC Port on Phone Fails During Large Data Transfer

 

 Has anyone run across the following scenario - 

 

 When large amounts of data are transferred between an IP Phone and an
attached PC such as during a Microsoft Office update the update fails.
When the failure occurs the phone shows the status of port 2 (PC Port)
as no link. it was working fine prior to the update starting. This fails
consistently when the phone PC port and the PC NIC is set for 100/full,
always seems to work when both are set to Auto/Auto or when the phone is
bypassed and the PC is plugged directly into the switch port.

 

Tried multiple phones 7941/61/11s. Current phone under test is running
phone load is 41.8-3-3SR2S and we are connected to a 3750 running
12.2.25 SEE2. Going to do more testing but wondering if any one else may
have run across this.

 

Thanks

Steve

 

 

Please consider the impact on our environment before printing this
e-mail. 

************************************
This email may contain privileged and/or confidential information that
is intended solely for the use of the addressee.  If you are not the
intended recipient or entity, you are strictly prohibited from
disclosing, copying, distributing or using any of the information
contained in the transmission.  If you received this communication in
error, please contact the sender immediately and destroy the material in
its entirety, whether electronic or hard copy.  This communication may
contain nonpublic personal information about consumers subject to the
restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.
You may not directly or indirectly reuse or disclose such information
for any purpose other than to provide the services for which you are
receiving the information.
There are risks associated with the use of electronic transmission.  The
sender of this information does not control the method of transmittal or
service providers and assumes no duty or obligation for the security,
receipt, or third party interception of this transmission.
************************************

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.3/1966 - Release Date:
02/22/09 17:21:00

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090224/d5096b23/attachment.html>