[cisco-voip] add new phone model

[Wes Sisk]

You will need to upgrade to a later version of CUCM that supports that 
model of phone.

Regards,
Wes

On Tuesday, February 24, 2009 11:45:46 AM, Darren Ducote 
<ducotedt at stfran.com> wrote:
>
> I am running call manager 5.1. We bought some 7975 phones but the 
> model does not show up in call manager. How do I go about adding this 
> new phone model?
>
>
> ------------------------------------------------------------------------
> This message contains confidential information and is intended only 
> for the individual named. If you are not the named addressee you 
> should not disseminate, distribute or copy this e-mail. Please notify 
> the sender immediately by e-mail if you have received this e-mail by 
> mistake and delete this e-mail from your system. E-mail transmission 
> cannot be guaranteed to be secure or error-free as information could 
> be intercepted, corrupted, lost, destroyed, arrive late or incomplete, 
> or contain viruses. The sender therefore does not accept liability for 
> any errors or omissions in the contents of this message, which arise 
> as a result of e-mail transmission.
>
> ***St. Francis Medical Center and affiliates encrypt email containing 
> Patient Health Information. You will receive a notice with 
> instructions on how to open any encrypted email you receive. To learn 
> more about this click *Here* 
> <http://userawareness.zixcorp.com/sites/index.php?b=141&type=1>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090224/99c6a729/attachment.html>