[cisco-voip] X-lite or SIP softphone

[Philip Walenta]

You also need to make sure that the "Digest User" on the third-party sip
device is set to the user you created.  I believe it also uses the "digest
credential" fields of the user, not the passwords.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Tuesday, February 24, 2009 12:30 PM
To: 'Scott Voll'; 'cisco-voip at puck-nether.net'
Subject: Re: [cisco-voip] X-lite or SIP softphone



The SIP username you have configured in X-Lite doesn't match a SIP username
in CM6 which is why you are getting 404 Not Found.  

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, February 24, 2009 11:01 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] X-lite or SIP softphone

 

I've been trying to get X-lite working as a SIP phone and I keep getting Not
Found error 404 and can't figure out what I'm banging my head against.

 

I have setup the SIP 3rd party phone in CM 6.1.2.1106, setup user (AD user)
and setup the device with extension.

 

I go to SIP Phone and enter username / Password / CM IP for SIP Domain and
no matter how I enter the info I get registration failed.

 

what am I Missing?  I've been through the FAQ and Googled and each thing has
given me a little but I'm still at NOT REGISTERED.

 

Any help woould be appriciated

 

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090224/168e2c41/attachment.html>