[cisco-voip] linux base for system 7

Jason Aarons (US) jason.aarons at us.didata.com
Tue Feb 24 17:28:48 EST 2009

I couldn’t get that command to give output on 7.0(1). Seems it wants show packages active pkg, but that doesn’t give any output either….


However another thought is you see when installing updates they are .rpm files. I started to type RPM was only for RedHat but I see other distros are using .rpm as well.





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Tuesday, February 24, 2009 2:54 PM
To: Lelio Fulgenzi
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] linux base for system 7


i bet 'show packages active' command at CLI would help to figure this out.

On Monday, February 23, 2009 7:25:08 PM, Lelio Fulgenzi <lelio at uoguelph.ca> <mailto:lelio at uoguelph.ca>  wrote:

Just wondering if Cisco publicly says what their system 7 appliance is based on?

Is it RedHat?

Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
"Bad grammar makes me [sic]" - Tshirt



cisco-voip mailing list
cisco-voip at puck.nether.net



This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090224/0e74d2c0/attachment.html>

More information about the cisco-voip mailing list