[cisco-voip] Update of services on multiple phones

[Tim Reimers]

Hi everyone--
 
I have a question that may be simpler than I think -
 
UCM 6.01
 
I have about 12 device pools configured with phones in them which have a
service built and applied to the phone.
 
That service needs to be replaced with a new service that's
per-device-pool 
(This is the Berbee paging service, done with QuickPage so that the
recipient group and message type are in the URL)
 
I need to remove the existing service on all the phones in these device
pools and then add a new service per-device-pool.
 
Can I do this with BAT in some way? 
 
Or is the only way to do this to do it by hand per-phone?
 
Tim Reimers
Systems Analyst II
Information Technology Services
City of Asheville
70 Court Plaza
Asheville, NC 28801
phone - 828-259-5512
treimers at ashevillenc.gov <mailto:timreimers at ashevillenc.gov> 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090101/901d833f/attachment.html>