[cisco-voip] using Meetingplace Express VT as MCU

[Ilya Rubinchik]

Hi!

I've configured MPE-VT as video conference bridge in CCM 6.1.1.
MCU successful registers using SCCP protocol.
But I cannot switch on video from CIPC+CUVA while in conference created by this MCU.

Whats the problem may be?

Thanks in advance.


Kind regards,

--
Ilya Rubinchik
Systems Engineer
Telecommunication Systems Division
ABRIS DISTRIBUTION, INC.
Tel: UZ: +998711405300 (ext. 2451)
Mobile: UZ: +998977128456
Fax: UZ: +998712995155
ICQ # 15508236
MSN: ilya.rubinchik at gmail.com<mailto:ilya.rubinchik at gmail.com>
E-mail: ilya.rubinchik at abrisdc.com<mailto:ilya.rubinchik at abrisdc.com>

[cid:image001.png at 01C96F55.2E08C600]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090105/d358c57a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 27647 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090105/d358c57a/attachment.png>